Self-priming pump Typ A
The WANGEN progressing cavity pump Type A has swivel pushers inside the suction chamber that switch the pump from suction to pump mode. The pump is not sensitive to foreign objects and the deposition of foreign objects in the suction housing is not possible. In addition, hollow rotors ensure quiet operation.
Spezifikation
Max. Förderleistung (m³/h)
Max. Differenzdruck (bar)
Vorteile und Eigenschaften
- low Life Cycle Costs
- high operational reliability
- high priming capacity
- high pressure performance
- no foreign body deposits in the suction housing
- consistent modular principle for high flexibility, low stocking of spare parts, short downtimes for maintenance and repairs
- almost pulsation-free conveyance
- easy fitting to slurry tankers or trolleys
- smooth running thanks to hollow rotors
- insensitive to foreign matter
- low maintenance
- easy, space-saving assembly
- good pumping performance even against high pressure
- high suction lift (self-priming under certain conditions)
- long service life
- multi-way slide valve installed in the suction housing, can be operated by hand lever
- no tangling of fibers
Mögliche Einsatzbereiche
Attached to slurry tankers, the WANGEN progressing cavity pump of type A is suitable for distributing water, slurry, and thick fluids, such as manure. The drive is implemented via a power take off profile that enables the pump to be easily coupled to the tanker.
- distributing
- transfer pumping
- filling
- for use as feeding, unloading and recirculation pump
- suction
Geeignet für folgende Fördermedien
- fertilizer
- liquid manure from chicken
- cattle slurry
- liquid manure
Technik/Details
- driven by PTO shaft
- stator with s-cone inlet for optimum filling of the pumping chamber
- slide valve in suction housing pivotable for suction and delivery
- conical slide valve housing with adjustable tap cock
- reinforced cardan joint
- hollow rotors for smooth running
- double, maintenance-free bearing
- shaft seal (mechanical face seal with oil quench)
- three suction flange in DN 133
Förderleistung | up to 704.5 gpm (at 540 rpm) |
Trockensubstanzgehalt | max.15 % |
Freier Kugeldurchgang | up to 3.43 inch |
Produkte live erleben
Auf folgenden Messen können Sie dieses Produkt live erleben
19.02.2025 - 20.02.2025
05.03.2025 - 06.03.2025
13.03.2025 - 13.03.2025
Was können wir für Sie tun?
Telefonische Beratung
Service/Ersatzteile:
Per Email anfragen
Sie haben Fragen, Anregungen oder benötigen weitere Informationen? Dann treten Sie bitte hier mit uns in Kontakt. Wir freuen uns.
Zum Formular
Downloads