Self-priming pump Typ GL-S
The WANGEN progressing cavity pump of type GL-S is particularly well suited to umbilical hose systems. Large distances and height differences are mastered easily. It may be used as a stationary pump or mobile pump, attached to a slurry tanker or chassis. The comprehensive range of pumps available make them a product for universal use.
They carry watery or thick media, as well as media loaded with solids just as well.
Spezifikation
Max. Förderleistung (m³/h)
Max. Differenzdruck (bar)
Vorteile und Eigenschaften
- low Life Cycle Costs
- high operational reliability
- high priming capacity
- long service life
- good pumping performance even against high pressure
- consistent modular principle for high flexibility, low stocking of spare parts, short downtimes for maintenance and repairs
- almost pulsation-free conveyance
- easy fitting to slurry tankers or trolleys
- smooth running thanks to hollow rotors
- insensitive to foreign matter
- easy to maintain thanks to large cleaning openings
- high pressure performance
- high suction lift (self-priming under certain conditions)
- consistant diameters at joint connections for constant flow-rates
- no foreign body deposits in the suction housing
- no tangling of fibers around the joint or joint connections
- consistent modular principle for high flexibility
- optimum service life even with difficult media
Mögliche Einsatzbereiche
WANGEN pumps of type GL-S are primarily used in agriculture, biogas plants and in environmental protection facilities.
- umbilical systems
- irrigating
- rinsing
- for use as feeding, unloading and recirculation pump
- filling
- distributing
- suction
Geeignet für folgende Fördermedien
- fertilizer
- liquid manure from chicken
- cattle slurry
- liquid manure
Technik/Details
- service-proven sealing systems
- hollow rotors for smooth running
- large variety of flange connections
- fully developed, robust universal joint
- suction housing with large inspection and cleaning openings
- various geometries and pump sizes
- stator with s-cone inlet for optimum filling of the pumping chamber
- driven by PTO or drive shaft with feather key
- safety and flexibility thanks to various additional features such as a pneumatic overflow unit, bypass and multi-way slide valve
- shaft seal (mechanical face seal with oil quench)
- double bearing arrangement with tapered roller bearings
Förderleistung | up to 523.3 gpm (at 540 rpm) |
Trockensubstanzgehalt | max. 15 % |
Freier Kugeldurchgang | up to 3.425 inch |
Produkte live erleben
Auf folgenden Messen können Sie dieses Produkt live erleben
06.05.2024 - 08.05.2024
13.05.2024 - 17.05.2024
10.06.2024 - 14.06.2024
Was können wir für Sie tun?
Telefonische Beratung
Service/Ersatzteile:
Per Email anfragen
Sie haben Fragen, Anregungen oder benötigen weitere Informationen? Dann treten Sie bitte hier mit uns in Kontakt. Wir freuen uns.
Zum Formular
Downloads