Chemicals
The fundamental advantages of WANGEN AMERICA pumps are clearly felt in the chemical industry. They enable the low-pulsation, pressure-stable, exactly dosed conveyance of the most difficult media such as polyol, isocyanate, PVC compounds, tensides, polyurethane adhesives, dispersions for glues or galvanic sludge. ATEX versions are standard of course, and the progressing cavity pumps can be supplied with a heating or cooling jacket to order.
The WANGEN progressing cavity pump of type KL-R and the specially designed hopper housing and modular sealing system enable the gentle conveyance of mediums without influencing the structure or quality of such. The low dead space version of the KL-RL series is ideal for use in the food industry and particularly easy to clean.
Pumps of the KL-RS series are hopper silo pumps for conveying and dosing dewatered sewage sludge with a high-solids content (DS) of 15% to 45%. These features make silo discharge pumps of the type KL-RS an indispensable core aggregate in modern sewage treatment plants.
The trough shape of the sanitary WANGEN MX-R pump prevents deposits from forming on the hopper walls, overfeeding in the pump tunnel ensures efficient conveying.
The sanitary pumps of the KL-SL serie convince through their easy cleaning and minimal deadspace construction. They can run heat- or coolable. Sanitary highlights are for example CIP (Cleaning in Place) as well as low pulsation and continuous conveying, independent of pressure and viscosity.
The WANGEN MX-F is a sanitary progressing cavity pump for emtying drums and vessels that contains high viscous mediums. The pump is therefore mounted on a plate. Both, pump and plate, is then pressed into the medium. The so displaced material feeds the pump through a hole in the plate.
This ensures the permanent feeding of the pump, even after changing the medium.
For demanding sanitary conveying and dosing of aqueous to highly viscous media in the food & beverage-, pharmaceutical and cosmetics industry. Low-impact delivery of products containing solids. CIP and SIP cleaning is possible, the pump is available as a mobile or stationary unit.
The new generation of the WANGEN Twin NG screw pump is part of the sanitary conveyance solutions from WANGEN and was designed to reliably pump low to highly viscous, volatile or gaseous products and for applications where maximum hygiene and efficiency is required. The sanitary pump for food and beverages, chemicals and cosmetics.
Available as 3A authorized version (WANGEN Twin NG 70, 104, 130) or EHEDG certified version (WANGEN Twin NG 70, 104, 130, 180).
- Spindle replacement without the need to re-synchronize the spindle shafts, thanks to fast-X-change® technology, developed by WANGEN PUMPEN.
- Cartridge design for simple and quick seal replacement.
- Coupling alignment by self-centring flange housing (centering-lantern optionally available). Therefore no need for re-alignment of the coupling, for instance after service work.
Available in the sizes 70, 104, 130, 180.
Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign materials. The low-pulsation continuous conveying of media is independent of the pressure and viscosity.
The WANGEN progressing cavity pumps of the KB-S serie are, in contrast to the KL-S serie, equipped with a block housing. There, the drive is coupled directly to the pump housing, which is ideal for normal pump operation or for small conveyed volumes. The pump conveys viscous and abrasive mediums.
The WANGEN progressing cavity pump KB-S GG is one of the basic products of WANGEN PUMPEN. One of the benefits of this pump is clearly the fewer parts within the individual assemblies. The KB-S GG is of cast iron and has a block housing (the drive is coupled directly to the pump housing).
The pump is available in the size 22 with cast iron housing. It is equipped with long-lasting, wear- and maintenance-free flexible joint without oil filling (prevents contamination of the media).
The progressing cavity pump serie WANGEN KL-S are basic products of Pumpenfabrik Wangen. The clear benefit is in the low lifecycle costs. This universally usable pump works with almost every low and extrem high viscous mediums (1 mPas -3.000.000 mPas). A highly reliable pump.
The changing of wear parts with very few actions, without removing the pump from the pipeline system thanks to Service in Place.
The WANGEN Xpress pump range has been specially developed for easy maintenance and to considerably shorten the servicing time and thus reduce costs. Reliable pumping of media, along with fast rotor/stator changes are ensured by our patented X-LIFT quick change system developed by WANGEN PUMPEN. The X-LIFT flange is constructed on standard flange design principles.
Available in the sizes 48, 64, 78 and 94.
Paints and lacquers
The highest dosing accuracy is required when pumping paints, lacquers and adhesives. This is a decisive argument in favor of WANGEN AMERICA pumps because in their case the pumping rate and speed are directly proportional. Optimum sealing is assured by standard and special seals.
Examples of conveyed media are: Dispersion paints, latex paints, glue for labels, polyurethane adhesives, plaster paints on a CACO3 basis, pigments.
The WANGEN progressing cavity pump of type KL-R and the specially designed hopper housing and modular sealing system enable the gentle conveyance of mediums without influencing the structure or quality of such. The low dead space version of the KL-RL series is ideal for use in the food industry and particularly easy to clean.
The sanitary pumps of the KL-SL serie convince through their easy cleaning and minimal deadspace construction. They can run heat- or coolable. Sanitary highlights are for example CIP (Cleaning in Place) as well as low pulsation and continuous conveying, independent of pressure and viscosity.
The WANGEN MX-F is a sanitary progressing cavity pump for emtying drums and vessels that contains high viscous mediums. The pump is therefore mounted on a plate. Both, pump and plate, is then pressed into the medium. The so displaced material feeds the pump through a hole in the plate.
This ensures the permanent feeding of the pump, even after changing the medium.
For demanding sanitary conveying and dosing of aqueous to highly viscous media in the food & beverage-, pharmaceutical and cosmetics industry. Low-impact delivery of products containing solids. CIP and SIP cleaning is possible, the pump is available as a mobile or stationary unit.
The new generation of the WANGEN Twin NG screw pump is part of the sanitary conveyance solutions from WANGEN and was designed to reliably pump low to highly viscous, volatile or gaseous products and for applications where maximum hygiene and efficiency is required. The sanitary pump for food and beverages, chemicals and cosmetics.
Available as 3A authorized version (WANGEN Twin NG 70, 104, 130) or EHEDG certified version (WANGEN Twin NG 70, 104, 130, 180).
- Spindle replacement without the need to re-synchronize the spindle shafts, thanks to fast-X-change® technology, developed by WANGEN PUMPEN.
- Cartridge design for simple and quick seal replacement.
- Coupling alignment by self-centring flange housing (centering-lantern optionally available). Therefore no need for re-alignment of the coupling, for instance after service work.
Available in the sizes 70, 104, 130, 180.
Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign materials. The low-pulsation continuous conveying of media is independent of the pressure and viscosity.
The WANGEN progressing cavity pumps of the KB-S serie are, in contrast to the KL-S serie, equipped with a block housing. There, the drive is coupled directly to the pump housing, which is ideal for normal pump operation or for small conveyed volumes. The pump conveys viscous and abrasive mediums.
The WANGEN progressing cavity pump KB-S GG is one of the basic products of WANGEN PUMPEN. One of the benefits of this pump is clearly the fewer parts within the individual assemblies. The KB-S GG is of cast iron and has a block housing (the drive is coupled directly to the pump housing).
The pump is available in the size 22 with cast iron housing. It is equipped with long-lasting, wear- and maintenance-free flexible joint without oil filling (prevents contamination of the media).
The progressing cavity pump serie WANGEN KL-S are basic products of Pumpenfabrik Wangen. The clear benefit is in the low lifecycle costs. This universally usable pump works with almost every low and extrem high viscous mediums (1 mPas -3.000.000 mPas). A highly reliable pump.
Paper
The end products of the paper industry have to meet the highest quality requirements. This is possible only with high-quality pumps which are exactly tailored to their task in the manufacturing process and guarantee the low-pulsation conveyance of the mostly shear-sensitive media.
Many manufacturers place their trust therefore in pumps from WANGEN AMERICA, and do so in all production segments from pulp preparation to the glue press. Examples of media conveyed: fillers, kaolin, titanium dioxide, deinking chemicals, retention agents, coating inks, starch suspensions, latex, adhesives, resins, pigment sludge, etc.
The WANGEN progressing cavity pump of type KL-R and the specially designed hopper housing and modular sealing system enable the gentle conveyance of mediums without influencing the structure or quality of such. The low dead space version of the KL-RL series is ideal for use in the food industry and particularly easy to clean.
Pumps of the KL-R Triplex series impress with their consistent dosing option, as an intermittent input is compensated by the buffer volume in the collecting container. The small space requirement and large receiving vessel are a result of the low construction and the large volume of the container. No bridge building of the media possible.
WANGEN pumps of the type KL-RQ have a transverse feed device for integrated bridge building and a collecting vessel for continuous feeding. They were designed for conveying dewatered sludge with a high content of dry matter (TS) ranging from 15% to 45%.
Pumps of the KL-RS series are hopper silo pumps for conveying and dosing dewatered sewage sludge with a high-solids content (DS) of 15% to 45%. These features make silo discharge pumps of the type KL-RS an indispensable core aggregate in modern sewage treatment plants.
Pumps of the KL-RÜ series are built according to our proven modular principle. This allows high
flexibility, low spare parts inventory, and minimum downtimes for repairs. Other features include: sophisticated and robust cardan joints with screw conveyors, fibers do not get wrapped around the joint and the joint connectors thanks to the effective
protection device.
For demanding sanitary conveying and dosing of aqueous to highly viscous media in the food & beverage-, pharmaceutical and cosmetics industry. Low-impact delivery of products containing solids. CIP and SIP cleaning is possible, the pump is available as a mobile or stationary unit.
The new generation of the WANGEN Twin NG screw pump is part of the sanitary conveyance solutions from WANGEN and was designed to reliably pump low to highly viscous, volatile or gaseous products and for applications where maximum hygiene and efficiency is required. The sanitary pump for food and beverages, chemicals and cosmetics.
Available as 3A authorized version (WANGEN Twin NG 70, 104, 130) or EHEDG certified version (WANGEN Twin NG 70, 104, 130, 180).
- Spindle replacement without the need to re-synchronize the spindle shafts, thanks to fast-X-change® technology, developed by WANGEN PUMPEN.
- Cartridge design for simple and quick seal replacement.
- Coupling alignment by self-centring flange housing (centering-lantern optionally available). Therefore no need for re-alignment of the coupling, for instance after service work.
Available in the sizes 70, 104, 130, 180.
Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign materials. The low-pulsation continuous conveying of media is independent of the pressure and viscosity.
Optimal substrate preparation and low wear increase the efficiency of your system.
The modular system for reliable protection of plant equipment:
X-TRACT (debris removal) + X-CUT (substrate cutting). Both components are available separately and are optimally co-ordinated with each other as an X-UNIT.
After the medium has been pumped through the X-CUT it has the highest digestion rate and thus increases the effectiveness of the biogas plant.
Low energy consumption coupled with maximum substrate yield. Foreign matter is removed from the medium without additional energy consumption.
Increased process safety through removal of system-harmful foreign bodies and debris with the aid of the foreign body separator X-TRACT and the cutting unit X-CUT. Optimum adaptation of the cutting unit to the medium easily possible.
The WANGEN X-UNIT explained by our application engineer: Find out more in this video here.
The WANGEN progressing cavity pumps of the KB-S serie are, in contrast to the KL-S serie, equipped with a block housing. There, the drive is coupled directly to the pump housing, which is ideal for normal pump operation or for small conveyed volumes. The pump conveys viscous and abrasive mediums.
The WANGEN progressing cavity pump KB-S GG is one of the basic products of WANGEN PUMPEN. One of the benefits of this pump is clearly the fewer parts within the individual assemblies. The KB-S GG is of cast iron and has a block housing (the drive is coupled directly to the pump housing).
The pump is available in the size 22 with cast iron housing. It is equipped with long-lasting, wear- and maintenance-free flexible joint without oil filling (prevents contamination of the media).
The progressing cavity pump serie WANGEN KL-S are basic products of Pumpenfabrik Wangen. The clear benefit is in the low lifecycle costs. This universally usable pump works with almost every low and extrem high viscous mediums (1 mPas -3.000.000 mPas). A highly reliable pump.
The changing of wear parts with very few actions, without removing the pump from the pipeline system thanks to Service in Place.
The WANGEN Xpress pump range has been specially developed for easy maintenance and to considerably shorten the servicing time and thus reduce costs. Reliable pumping of media, along with fast rotor/stator changes are ensured by our patented X-LIFT quick change system developed by WANGEN PUMPEN. The X-LIFT flange is constructed on standard flange design principles.
Available in the sizes 48, 64, 78 and 94.
Petrochemistry
The tasks performed by pumps in the petrochemical industry are demanding and often take place in the toughest conditions. Here, too, pumps from WANGEN AMERICA demonstrate high reliability and performance. With their platform concept and variable design they open up a wide spectrum of possible applications, from exploration wells and the further processing of crude oil to the disposal of old oil. Our pumps have proven themselves likewise on special projects for processing crude oil after coastal oil tanker incidents. WANGEN AMERICA pumps are a popular choice not only in connection with oil but also for converting alternative energy resources into useful fuels.
The WANGEN progressing cavity pump of type KL-R and the specially designed hopper housing and modular sealing system enable the gentle conveyance of mediums without influencing the structure or quality of such. The low dead space version of the KL-RL series is ideal for use in the food industry and particularly easy to clean.
Pumps of the KL-R Triplex series impress with their consistent dosing option, as an intermittent input is compensated by the buffer volume in the collecting container. The small space requirement and large receiving vessel are a result of the low construction and the large volume of the container. No bridge building of the media possible.
WANGEN pumps of the type KL-RQ have a transverse feed device for integrated bridge building and a collecting vessel for continuous feeding. They were designed for conveying dewatered sludge with a high content of dry matter (TS) ranging from 15% to 45%.
Pumps of the KL-RS series are hopper silo pumps for conveying and dosing dewatered sewage sludge with a high-solids content (DS) of 15% to 45%. These features make silo discharge pumps of the type KL-RS an indispensable core aggregate in modern sewage treatment plants.
Pumps of the KL-RÜ series are built according to our proven modular principle. This allows high
flexibility, low spare parts inventory, and minimum downtimes for repairs. Other features include: sophisticated and robust cardan joints with screw conveyors, fibers do not get wrapped around the joint and the joint connectors thanks to the effective
protection device.
Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign materials. The low-pulsation continuous conveying of media is independent of the pressure and viscosity.
The WANGEN progressing cavity pump KB-S GG is one of the basic products of WANGEN PUMPEN. One of the benefits of this pump is clearly the fewer parts within the individual assemblies. The KB-S GG is of cast iron and has a block housing (the drive is coupled directly to the pump housing).
The progressing cavity pump serie WANGEN KL-S are basic products of Pumpenfabrik Wangen. The clear benefit is in the low lifecycle costs. This universally usable pump works with almost every low and extrem high viscous mediums (1 mPas -3.000.000 mPas). A highly reliable pump.
The changing of wear parts with very few actions, without removing the pump from the pipeline system thanks to Service in Place.
The WANGEN Xpress pump range has been specially developed for easy maintenance and to considerably shorten the servicing time and thus reduce costs. Reliable pumping of media, along with fast rotor/stator changes are ensured by our patented X-LIFT quick change system developed by WANGEN PUMPEN. The X-LIFT flange is constructed on standard flange design principles.
Available in the sizes 48, 64, 78 and 94.
What can we do for you?
You have questions, suggestions or you need more information? Then please contact us here. We are pleased.
Form